Kool Stop Weinmann 4 Dot Inserts Black

Key Features:

  • Overall length: 42.5 mm
  • Pad contact width: 10 mm
  • Weight: ca. 18 gr/pair
  • Made in the USA

Weinmann 4 Dot replacement pads for vintage Weinmann brake shoe holders.  Premium quality for original restoration projects with very good braking capacity compared to standard pads. They fit exactly with no need to trim

The special Black compound is designed for use in mainly dry conditions

Installation Instructions:

  1. Clean the rim surface before installing new pads
  2. Place the new Kool Stop pads into the brake caliper arms and finger tighten the nuts
  3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
  4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
  5. Check the pad and rim alignment after the pads are broken in and after every ride
  6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Two pairs supplied 


MSRP: £26.00

Available

Quantity
Amba Marketing (UK) Ltd
Powered by B2B Wave