Skip to Navigation Skip to Content


FlapJacked UK
Busch & Muller Lights & Mirrors
Supernova Lights
Axa Lights & Locks
E-Bike Products
Kool Stop Braking - Rim Pads
Kool Stop Braking - Disc Pads
Hebie Chainguards & Propstands
tout terrain
Overboard Waterproof Bags & Cases
Kiddy Van
Croozer: Child, Pet & Cargo Trailers
BOB Trailers
Swiss Eye Sports Glasses
Trimobil Bells
Nantucket Baskets
Bike Accessories
RRP £14.00
Busch&Muller Secula Mudguard Mounted
E-Bike Products : Busch & Muller
Busch&Muller Secula Mudguard Mounted - Click to enlarge.


Available in:
  • Black
    The Secula can be connected to E-Bike systems which provide a 6V DC feed. The input voltage can also be obtained by connecting the rear light to one of the B&M headlights that convert a higher input voltage and output the required 6V DC for the rear. Optically, the Secula appears the same as its dynamo counterpart, but the circuit board is different and the usage may not be interchanged.

    B&M recommend that a specialist E-Bike retailer install the lights for you
Key Features
  • Can be connected to all DC power sources supplying 62V DC
  • Can be powered by connecting to the the B&M front E-Bike lights
  • Can be mounted on the mudguard
  • Cannot be dynamo driven
    Please note the following recommendations from Busch & Muller if you are planning to install your own E-Bike lighting system:

  • Establish and/or measure the voltage on the cables or connecting point intended for the connection. Make sure this is within the parameters of the light specification
  • Establish and/or measure the polarity of the above mentioned connection and make sure to connect respectively to the correct pole using the instructions and/or the + / - signs on the light
  • If you are not able to establish either of the above, or are not sure then please refer to your local electric bike specialist to install the lights for you

  • A list of these specialist retailers can be found on our website
Join our Email Newsletter: